Assoc Prof. DR. Mohamad Nasir

  •   

    Academic Qualifications

    Year Degree Awarding Institution
    1994 B. Sc. University of Missouri~Rolla, USA

    1997

    M.Sc.

    University of Missouri~Rolla, USA

    1999

    Ph.D.

    University of Missouri~Rolla, USA

    2011

    Certified Well Control Trainee -Supervisor Level

    International Association of Drilling Contractors (IADC)

    2013 Executive Certificate in Advance Business And Entreprenurship Management

    Ministry of Higher Education Malaysia

     

    Employments

        • Lecturer, School of Chemical Sciences, Universiti Sains Malaysia (February 2000 – October ’04)
        • Senior Lecturer, School of Chemical Sciences, Universiti Sains Malaysia (November ‘04 - August ’06)
        • Associate Professor, School of Chemical Sciences, Universiti Sains Malaysia (September ‘06 - Present)
        • R&D Manager, NSE Resources Corporation(M)Sdn. Bhd. (July 01, 2014 – November 30, 2016)


  •   

    Research Interest

    1. Lignin and Lignocellulosic-based Products
    2. Polymer (MIP) and Biomaterial
    3. Petroleum Engineering and Chemistry in Petroleum Industry


    Research Topics

    1. Development of advanced water-based drilling fluid for oil and gas wells
    2. Development of formaldehyde-free wood adhesive
    3. Development of green corrosion inhibitor/convertor
    4. Development of plant-based emulsifying agent and food-grade products
    5. Development of heavy metal adsorbent for waste water treatment
    6. Separation of precious compound from lignin and plants



  •   

    Research Articles

    1. M. N. Mohamad Ibrahim, C. S. Sipaut and N. N. Mohamad Yusof: 2009, “Purification of Vanillin by a Molecular Imprinting Polymer Technique”, Separation and Purification Technology, 66, 450-456.

    2. Mohamad Nasir Mohamad Ibrahim, Mohamed Rashid Ahmed-Haras, Coswald Stephen Sipaut, Hassan Y.Aboul-Enein and Abdullahi Ali Mohamed: 2010, “Preparation and characterization of a newly water soluble lignin graft copolymer from oil palm lignocellulosic waste”, Carbohydrate Polymers, 80, 1102-1110.

    3. M. N. Mohamad Ibrahim, W.S. Wan Ngah, M.S. Norliyana, W.R. Wan Daud, M. Rafatullah, O. Sulaiman, R. Hashim: 2010, “A novel agricultural waste adsorbent for the removal of lead (II) ions from aqueous solutions”, Journal of Hazardous Materials, 182, 377–385.

    4. Yoga Sugama Salim, Amirul Al-Asraf Abdullah, Coswald Stephen Sipaut @ Mohd Nasri and Mohamad Nasir Mohamad Ibrahim: 2011, “Biosynthesis of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Characterization of Its Blend with Oil Palm Empty Fruit Bunch Fibers”, Bioresource Technology, 102: 3626-3628.

    5. Mohamad Nasir Mohamad Ibrahim, Zakaria Norhidaya, Coswald Stephen Sipaut, Othman Sulaiman and Rokiah Hashim: 2011, “Chemical and thermal properties of lignins from oil palm biomass as a substitute for phenol in a phenol formaldehyde resin production”, Carbohydrate Polymers, 86 (2011) 112– 119.

    6. Danish, Mohammed; Hashim, Rokiah; Mohamad Ibrahim, Mohamad Nasir; Mohd, Rafatullah; Sulaiman, Othman; Ahmad, Tanweer; Shamsuzzoha, Mohammad; Ahmad, Anees: 2011,”Sorption of copper (II) and nickel (II) ions from aqueous solutions using calcium oxide activated date (Phoenix dactylifera) stone carbon: Equilibrium, kinetic and thermodynamic studies”, J. Chem. Eng. Data, 56, 3607–3619.

    7. Nicolas Brosse, Mohamad Nasir Mohamad Ibrahim and Afidah Abdul Rahim: 2011, “Biomass to bioethanol: Initiatives of the future for lignin”, ISRN Materials Science, Vol. 2011, Article ID 461482.

    8. Ebrahim Akbarzadeh, M. N. Mohamad Ibrahim, Afidah Abdul Rahim: 2011, “Corrosion Inhibition of Mild Steel by Kraft and Soda Lignins Extracted from Oil Palm Empty Fruit Bunch”, Int. J. Electrochem. Sci., 6 (2011), 5396 – 5416

    9. S. A. Bhawani, M. N. Mohamad Ibrahim, O. Sulaiman, R. Hashim, A. Mohammad and S. Hena: 2012, “Thin-layer Chromatography of Amino Acids: A Review”, Journal of Liquid Chromatography & Related Technologies, 35, 1497-1516.

    10. Noor Aziah Abdul Aziz, Lee-Hoon Ho, Baharin Azahari, Rajeev Bhat, Lai-Hoong Cheng and Mohamad Nasir Mohamad Ibrahim: 2011, “Chemical and functional properties of the native banana (Musa acuminata x balbisiana Colla cv. Awak) pseudo-stem and pseudo-stem tender core flours”, Food Chemistry, 128, 748–753.

    11. T.Ahmad, M.Danish, M.Rafatullah, A.Ghazali, O.Sulaiman, R.Hashim. M.N. Mohamad Ibrahim: 2011, “The use of date palm as a potential adsorbent for wastewater treatment: A review”, Environmental Science and Pollution Research, 19(5):1464-84.

    12. M. Danish, R. Hashim, M. N. Mohamad Ibrahim, M.Rafatullah, O.Sulaiman: 2012, “Surface characterization and comparative adsorption properties of Cr(VI) on pyrolysed adsorbents of Acacia mangium wood and Phoenix dactylifera stone carbon”, Journal of Analytical and Applied Pyrolysis, 97, 19-28.

    13. Mohamad Nasir Mohamad Ibrahim, RB Sriprasanthi Balakrishnan, Shaharuddin Shamsudeen, Farook Adam and Showkat Ahmad Bahwani: 2012, “A concise review on the natural existance, synthesis, properties and applications of syringaldehyde”, BioResources, 7(3), 1-23.

    14. E. Akbarzadeh; M. N. M. Ibrahim and A. A. Rahim: 2012, “Monomers of lignin as corrosion inhibitors for mild steel: study of their behaviour by factorial experimental design”, Corrosion Engineering, Science and Technology, 47(4), 302-311.

    15. Nur Asshifa Md Noh, Amirul Al-Ashraf Abdullah, Mohamad Nasir Mohamad Ibrahim and Ahmad Ramli Mohd Yahya: 2012, “Rhamnolipid produced by Pseudomonas aeruginosa USM-AR2 facilitates crude oil distillation”, J. Gen. Appl. Microbiol., 58, 153-161.

    16. M. Hazwan Hussin, Afidah Abdul Rahim, Mohamad Nasir Mohamad Ibrahim and Nicolas Brosse: 2013, “Physicochemical characterization of alkaline and ethanol organosolv lignins from oil palm (Elaeis guineensis) fronds as phenol substitutes for green material applications”, Industrial Crops and Products, 49, 23– 32.

    17. M. Danish,R. Hashim, M.N.Mohamad Ibrahim and O. Sulaiman: 2013, “Characterization of Physically Activated Acacia mangium Wood-Based Carbon for the Removal of Methyl Orange Dye”, BioResources, 8 (3), 4323-4339.

    18. S. A. Bhawani, M. N. Mohamad Ibrahim, H. M. Albishri, R. Hashim, A. Mohammad and Z. A. Khan: 2013, “Separation of Four Cationic Surfactants on Silica Gel 60 F254 High Performance Thin-layer Chromatographic Plates”, Journal of Liquid Chromatography & Related Technologies, DOI: 10.1080/10826076.2013.830267.

    19. M. Hazwan Hussin, Afidah Abdul Rahim, Mohamad Nasir Mohamad Ibrahim, Mehdi Yemloul, Dominique Perrin and Nicolas Brosse: 2014, “Investigation on the structure and antioxidant properties of modified lignin obtained by different combinative processes of oil palm fronds (OPF) biomass”, Industrial Crops and Products, 52, 544– 551.

    20. Mohammed Danish, Rokiah Hashim, M.N. Mohamad Ibrahim and Othman Sulaiman, 2014, “Optimized preparation for large surface area activated carbon from date (Phoenix dactylifera L.) stone biomass”, Journal of Biomass and Bioenergy, 61, 167-178.

    21. Mohamed Rashid Ahmed-Haras, Mohamad Nasir Mohamad Ibrahim, Abdussalam Salhin Mohamed Ali, Coswald Stephen Sipaut and Ashraf Ahmed Ali Abdalsalam, 2013, “Lignocellulosic-Based Rheological Modifier for High Temperature Oilfield Drilling Operations”, American Journal of Engineering Research, Vol. 02(11), 230-241.

    22. Mohamad Ibrahim, M. N., Lim, S. L., Ahmed-Haras, M. R., and Fayyadh, F. S. (2014), “Preparation and characterization of lignin graft copolymer as a filtrate loss control agent for the hydrocarbon drilling industry," BioResources, 9(1), 1472-1487.

    23. M. Hazwan Hussin, Afidah Abdul Rahim, Mohamad Nasir Mohamad Ibrahim, Dominique Perrin, Mehdi Yemloul and Nicolas Brosse: 2014, “Impact of catalytic oil palm fronds (OPF) pulping on organosolv lignin properties”, Polymer Degradation and Stability”, 109, 33-39.

    24. M. Hazwan Hussin, Afidah Abdul Rahim, Mohamad Nasir Mohamad Ibrahim, Dominique Perrin, Nicolas Brosse: 2015, “Enhanced properties of oil palm fronds (OPF) lignin fractions produced via tangential ultrafiltration technique”, Industrial Crops and Products, 66, 1– 10.

    25. Fauzi Muhammad Djuned, Mohammad Asad, Mohamad Nasir Mohamad Ibrahim and Wan Rosli Wan Daud: 2014, “Synthesis and Characterization of Cellulose Acetate from TCF Oil Palm Empty Fruit Bunch Pulp”, BioResources, 9(3), 4710-4721.

    26. Yong Foo Wong, Ahmad Makahleh, Bahruddin Saad, Mohamad Nasir Mohamad Ibrahim, Afidah Abdul Rahim and Nicolas Brosse: 2014, “UPLC method for the determination of vitamin E homologues and derivatives in vegetable oils, margarines and supplement capsules using pentafluorophenyl column”, Talanta, 130, 299-306

    27. Abbas Hasan Faris, Afidah Abdul Rahim and Mohamad Nasir Mohamad Ibrahim: 2015, “Preparation of lignopolyols by chemical modification of Kraft lignin from oil palm lignocellulosic waste”, Advanced Materials Research, Vol. 1107, 137-141.

    28. M. Hazwan Hussin, Afidah Abdul Rahim, Mohamad Nasir Mohamad Ibrahim, Nicolas Brosse: 2015, “Improved corrosion inhibition of mild steel by chemically modified lignin polymers from Elaeis guineensis agricultural waste”, Materials Chemistry and Physics, 163, 201-212.

    29. Abbas Hasan Faris, Mohamad Nasir Mohamad Ibrahim and Afidah Abdul Rahim: 2016, “Preparation and characterization of green adhesives using modified tannin and hyperbranched poly (amine-ester)”, International Journal of Adhesion and Adhesives, 71, 39–47.

    30. M. Hazwan Hussin, Afidah Abdul Rahim, Mohamad Nasir Mohamad Ibrahim, Nicolas Brosse: 2016, “The capability of ultrafiltrated alkaline and organosolv oil palm (Elaeis guineensis) fronds lignin as green corrosion inhibitor for mild steel in 0.5 M HCl solution”, Measurement, 78, 90–103.

    31. Showkat Bhawani, Siong Fong Sim and Mohamad Nasir Mohamad Ibrahim: 2015, “Spectrophotometric Analyisis of Caffeine”, International Journal of Analytical Chemistry (in print).

    32. Abbas Hasan Faris, Afidah Abdul Rahim, Mohamad Nasir Mohamad Ibrahim Adel Mustafa Alkurdi and Irfan Shah: 2016 "Combination of lignin polyol-tannin adhesives and polyethylenimine for the preparation of green adhesives water resistant", Journal of Applied Polymer Science, 133, 43437.

    33. Norliyana Mohd Salleh, Sabariah Ismail and Mohamad Nasir Mohamad Ibrahim: 2015, “Radical Scavenging Activity of Lignin Extracted from Oil Palm Empty Fruit Bunch and Its Effect on Glutathione-S-Transferase Enzymes Activity”, Asian Journal of Pharmaceutical and Clinical Research, 8(3), 81-87.


    Books

    1. Mohamad Nasir Mohamad Ibrahim, Norliyana Mohd Salleh, Nor Nadiah Mohamad Yusof, Azilawati Md. Ghani, 2010, Keistimewaan Lignin Daripada Kelapa Sawit, (Exceptional Advantages of Lignin from Oil Palm), Penerbit Universiti Sains Malaysia, Pulau Pinang, 181 pages.
    2. Mohamed Rashid Ahmed-Haras and Mohamad Nasir Mohamad Ibrahim, 2011, Multi-Functional Additive for Hydrocarbon Drilling Industry, Number:  28979; ISBN: 978-3-8465-0140-5, LAMBERT Academic Publishing GmbH & Co., Germany, 106 pages.

     


    Book Chapter

     1. Mohamad-Ibrahim, M. N. and Numbere, D. T.: 1999, “Boundary Element Analysis of the Productivity of Complex Petroleum Well Configurations”, In Boundary Element Technology XIII, Editors: C. S. Chen, C. A. Brebbia and D. Pepper, WIT Press, Southampton, pp. 25-34

    2. M. N. Mohamad Ibrahim, J. Abdullah and K. W. Kong: 2002, “Boundary Shape Effects at a Constant Perimeter on the Productivity of Oil Well Clusters”, In Boundary Element Techniques, Editors: Zhenhan Yao and Aliabadi M. H., Tsinghua University Press and Springer-Verlag, Beijing, pp. 61-64.

    3. M. N. Mohamad Ibrahim, J. Abdullah and A. K. Basemin: 2003, “Optimizing Oil Production Rate using Pressure Distribution Studies” In Advances in Boundary Element Technology IV, Editors: M. H. Aliabadi and R. Gallego, Queen Mary, University of London, pp. 385-390.

    4. Mohamed Rashid Ahmed Haras, Mohamad Nasir Mohamad Ibrahim and Rohana Adnan: 2015, “Preparation of Chemically Modified Lignin and Its Application in Oil and Gas Drilling Industry” in Handbook of Sustainable Polymers: Structure and Chemistry, Editors: Vijay Kumar Thakur and Manju Kumari Thakur, Pan Stanford Publishing Pte. Ltd, pp. 107-150.


     

  •   

    International Collaboration

    1. Visiting Scientist; Laboratoire De Chimie Du Solide Mineral – Universite Henri Poincare, Nancy I, France;    28/12/04 – 26/01/05
    2. International Research Collaboration with Professor Peter Cormack from University of Strathclyde, Glasgow, since 2009
    3. International Research Collaboration with Asian Institute of Technology, Thailand, 2011,

     

  •   

    Honors/Awards

     

    1. Won the Best Oral Award (1st Prize) for paper entitled: “Formulation of An Environmentally Friendly Adhesive for Wood”, 2007, International, The 8th International Seminar on Polymer Science and Technology, Tehran, Iran.

    2. Won the National Intellectual Property Award in conjunction with the National Intellectual Property Day 2010 (26/04/2010), 1st Place for Patent Category.

    3. Won the National Intellectual Property Award in conjunction with the National Intellectual Property Day 2013 (13/06/2013), 1st Runner Up for Trademark Category.

    4. WIPO-MyIPO Award in the Trademark Category (Second Prize) in conjunction with the National Intellectual Property Day 2013 (13/06/2013).




    Academic Assessor/External Examiner/ Member of Board of Studies

     

    1. Bachelor of Petroleum Engineering Program, 01 July 2008 – 30 June 2009, Universiti Teknologi Malaysia – Program External Examiner.

    2. Master of Petroleum Engineering Program, 01 August 2008 – 31 July 2009, Universiti Teknologi Malaysia – Program External Panel.

    3. Appointed as an Academic Committee Member for the Faculty of Petroleum Engineering and Renewable Energy Engineering, 01 October 2010 – 30 September 2012, Universiti Teknologi Malaysia.

    4. Bachelor and Master of Petroleum Engineering Programs, 26 – 27 January 2011, Universiti Teknologi Malaysia – Program External Examiner.

    5. Appointed as an Academic Committee Member for the Faculty of Petroleum Engineering and Renewable Energy Engineering, 15 March 2013 – 14 March 2015, Universiti Teknologi Malaysia.

    6. Appointed as a Judge in the 1st EOR Simulation Competition organized by Universiti Teknologi PETRONAS, 24-05 June 2013.

    7. Appointed as an Expert Panel for A Workshop to review the curriculum for Petroleum Engineering Program, 04 July 2013, Universiti Teknologi Petronas.

    8. Appointed as a Judge in the State Level Science & Engineering Innovations Competition, 27 May 2013.

    9. Appointed as a Judge in the 2nd EOR Simulation Competition organized by Universiti Teknologi PETRONAS, 04-06 March 2014.

    10. 2005, Member of Malaysian Higher School Certificate Syllabus Committee (Chemistry) for Malaysian Examination Council.

     


     

    Awards for Innovation

     

    1. Mohamad Nasir Mohamad Ibrahim, Coswald Stephen Sipaut, Izwan Ezat, 2006, Product Title: “Plating on Anything!”, Won Gold Medal at the 17th International Invention, Industrial Design & Technology Exhibition (ITEX) at Kuala Lumpur Convention Center, Kuala Lumpur, Malaysia. 

    2. Mohamad Nasir Mohamad Ibrahim, Coswald Stephen Sipaut, Izwan Ezat, 2007, Product Title: “Plating on Anything!”, Won Silver Medal at the 56th World Exhibition of Innovation Research & New Technologies at Brussels, Belgium

    3. Mohamad Nasir Mohamad Ibrahim, Norliyana Mohd. Salleh, Nur Afiah Zawawi, Thi Liana Abdul Samad, Nor Amalia Che Azhar, 2009, Product Title: “Vanillin Separation from Black Liquor and Vanillin Soap Making”, Won Gold Medal at the Malaysia Technology Expo 2009, Kuala Lumpur, Malaysia

    4. Mohamad Nasir Mohamad Ibrahim, Mohamed Rashid Ahmad Mohamed Haras, Coswald Stephen Sipaut, 2010, Product Title: “ViscoLigno”, Won Gold Medal at the Malaysia Technology Expo 2010, Kuala Lumpur, Malaysia

    5. Mohamad Nasir Mohamad Ibrahim, Mohamed Rashid Ahmad Mohamed Haras, Coswald Stephen Sipaut, 2010, Product Title: “ViscoLigno”, Won The Zagreb Inventors Association Special award at the Malaysia Technology Expo 2010, Kuala Lumpur, Malaysia

    6. Mohamad Nasir Mohamad Ibrahim, Wan Saime Wan Ngah, Wan Rosli Wan Daud, Norliyana Mohd Salleh, Mohd Firdaus Bawadi, 2010, Product Title: “LignoZorp”, Won Gold Medal at the 21st International Invention, Industrial Design & Technology Exhibition (ITEX) at Kuala Lumpur Convention Center, Kuala Lumpur, Malaysia

    7. Ahmad Ramli Mohd Yahya, Mohamad Nasir Mohamad Ibrahim, Nur Asshifa Md. Noh, 2010, Product Title: “A method of treating crude oil using microorganism”, Won Silver Medal at the 21st International Invention, Industrial Design & Technology Exhibition (ITEX) at Kuala Lumpur Convention Center, Kuala Lumpur, Malaysia

    8. Ahmad Ramli Mohd Yahya, Mohamad Nasir Mohamad Ibrahim, Nur Asshifa Md. Noh, 2010, Product Title: “A Microbial-Enhanced Oil Distillation Process”, Won Bronze Medal at the Bio Malaysia 2010 Exhibition at Kuala Lumpur Convention Center, Kuala Lumpur, Malaysia.

    9. Mohamad Nasir Mohamad Ibrahim, Mohamed Rashid Ahmad Mohamed Haras, Coswald Stephen Sipaut, 2011, Product Title: “ViscoLigno”, Won Gold Medal at the 39th International Exhibition of Inventions of Geneva, Switzerland.

    10. Mohamad Nasir Mohamad Ibrahim, Norliyana Mohd Salleh, Wan Saime Wan Ngah, Mohd Firdaus Bawadi and Wan Rosli Wan Daud, 2011, Product Title: “LignoZorp”, Won Silver Medal at the International Invention Exhibition of Ideas, Invention and Innovations Trade Fair (IENA 2011) at Nuremberg, Germany. 

    11. Mohamad Nasir Mohamad Ibrahim, Norliyana Mohd Salleh, Wan Saime Wan Ngah, Mohd Firdaus Bawadi and Wan Rosli Wan Daud, 2011, Product Title: “LignoZorp”, Won a Certificate of Appreciation for Outstanding Achievement in World Competition of Green Invention by the International Federation of Inventors’ Associations at Nuremberg, Germany. 

    12. Mohamad Nasir Mohamad Ibrahim, Norliyana Mohd Salleh, Wan Saime Wan Ngah, Mohd Firdaus Bawadi and Wan Rosli Wan Daud, 2011, Product Title: “LignoZorp”, Won Silver Medal at the International Warsaw Inventions Show (IWIS 2011) at Warsaw, Poland.

    13. Mohamad Nasir Mohamad Ibrahim, Mohamed Rashid Ahmad Mohamed Haras, Coswald Stephen Sipaut, 2011, Product Title: “ViscoLigno”, Won Gold Medal at the 4th International Invention Fair in the Middle East, Kuwait.

    14. Mohamad Nasir Mohamad Ibrahim and Norliyana Mohd Salleh, 2014, Product Title: “LignoRust: An Ecofriendly Rust Converter”, Won Gold Medal and Special Compliment from the Panel Jury at the Malaysia Technology Expo 2014, Kuala Lumpur, Malaysia.

     


     

    Patents & Trademarks

     

    1.     MY-147142-A (Date Awarded: November 14, 2012): A Process for Extracting Vanillin from Oil Palm Lignocellulosic Wastes, Malaysia, (Filing No: PI 20090781 Date: February 26, 2009)

      2.  US 8,895,477 B2 (Date Awarded: November 25, 2014):: Method For Preparing A Gelling And Viscosifying Agent For Drilling Mud And The Product Thereof

    3.     Russian Patent – 2538268 (Date Awarded: November 18, 2014):: Method For Preparing A Gelling And Viscosifying Agent For Drilling Mud And The Product Thereof

    4.     Thailand Patent – 9379 (Date Awarded: November 18, 2014):: Method For Preparing A Gelling And Viscosifying Agent For Drilling Mud And The Product Thereof

    5.     Indonesian Patent - ID P 000 039 3419379 (Date Awarded: September 07, 2015): Method For Preparing A Gelling And Viscosifying Agent For Drilling Mud And The Product Thereof

    6.     MY-147418-A (Date Awarded: December 14, 2012): A Method For Pretreating Crude Oil Using Microorganism, (Filing No: PI20095437 Date: December 17, 2009)

    7.     MY-145288-A (Date Awarded: January 13, 2012): Lignin-Based Adsorbent for Removing Heavy Metals From Wastewater, (Filing No: PI 20095688 Date: December 31, 2009)

    8.     2010012369: ViscoLigno (Trade Mark), filing date: 08 July 2010; Granted date: 14 September 2012

    9.     2010012370: LignoZorp (Trade Mark), filing date: 08 July 2010; Granted date: 21 November 2011

     10.   2014001584: LignoRust (Trade Mark), filing date: 30 January 2014; Granted date: 11 June 2015

     

     


     

News @ChemUSM

2020 Cohort of Women Leaders in the Southeast Asia Women

2020 Cohort of Women Leaders in the Southeast Asia Women

2020 Cohort of Women Leaders in the Southeast Asia Women Congratulations to Dr. Lee Hooi Ling for being selected into the Southeast Asia Women 2020 Cohort in Science, Education and Women Categories. It is an initiative by the Young Southeast Asia Leaders Initiative (YSEALI) Women's Leadership Academy...

MoA signing for the establishment of USM-UL Centre

MoA signing for the establishment of USM-UL Centre

MOA signing for the establishment of USM-UL Centre On 19th of August 2019, the memorandum of agreement (MOA) for the establishment of USM-UL Centre was signed between Universiti Sains Malaysia and Universite de Lorraine. The establishment of USM-UL Centre is also to celebrate the 20th years of...

MoU Between Kazakh British Technical University & Universiti Sains Malaysia

MoU Between Kazakh British Technical University & Universiti Sains Malaysia

MoU Between Kazakh British Technical University & USM  Signing ceremony of MoU between Satbayev University and USM in the office of  Prof. Iskakov Rinat, the Vice-Rector for Academic Work,  Satbayev University - December 2018, Almaty, Kazakhstan  

MoU between the National Tsing Hua University, Taiwan and USM

MoU between the National Tsing Hua University, Taiwan and USM

MoU between the National Tsing Hua University, Taiwan and USM  The MoU between the National Tsing Hua University, Taiwan and USM was signed on 26 April, 2019. The main objective of this MoU is to set up the Taiwan-Malaysia Innovation Centre for Clean Water and Sustainable Energy...

ITEX 2019

ITEX 2019

ITEX 2019 Dr. Lee Hooi Ling and her MSc. student, Teng Teck Jin won a Silver Medal for MyBiocide: An Effective Solution for Tropical Wood in the recent ITEX2019. This project is in collaboration with Dr. Mohamad Nasir Mat Arip from FRIM. Congratulations to the team!

MoU Signing Ceremony Between SCS and Agilent Technologies

MoU Signing Ceremony Between SCS and Agilent Technologies

MoU Signing Ceremony Between SCS and Agilent Technologies Universiti Sains Malaysia (USM) and Agilent Technologies Sales (M) Sdn. Bhd. have agreed to partner on developing the integrated three-dimensional gas chromatography-mass spectrometry (3D-GCMS) technologies for metabolomics research applications in the country. Under this MoU, Dr. Wong Yong Foo,...

Courtesy Visit From Agilent Group

Courtesy Visit From Agilent Group

Courtesy Visit From Agilent Group   Dr. Wong Yong Foo, along with the Dean, Professor Dr. Afidah Abdul Rahim, is coordinating the courtesy visit to Professor Datuk Dr. Asma Ismail from Dr. Darlene Solomon, the Senior Vice-President and Chief Technology Officer, Agilent Technologies at the Vice-Chancellor’s Office...

Tabung wecare new